Here are the products we offer
Protecting and maintain your natural stone surfaces is a life-long process. Upon initial installation, our team uses
penetrating sealers to lessen the vulnerability of the stone to staining and penetration by liquids.
However, periodic maintenance must be done. Cleaning with neutral (pH7) cleaners, dusting, wet mopping, and re-
sealing must be done regularly to maintain the appearance and integrity of the stone.
When using sealers, manufacturers recommendations for application as well as health and safety MUST be
followed. It is also recommended to test the sealer in a small, inconspicuous area before proceeding with the whole
stone surface.
When applying a sealer, make sure you wipe the surface of the stone until the sealer is dry/fully absorbed into the
stone. This ensures proper application. If stone is left wet with sealer, the surface may appear to have a haze or
dullness. This is sealer residue.
| # | Penetrating Sealers/Impregnators | Topical Coatings |
|---|---|---|
| 1 |
Penetrate the stone surface and sit under the stone surface, a few millimeters below |
Bond to the stone surface and provide a sacrificial layer over the stone |
| 2 |
Suitable for all finishes of natural stone and recommended by us |
Rarely used on natural stone and not recommended by us |
| 3 |
Topical sealers must be reapplied often |
|
| 4 |
Will generally change the appearance of the natural stone, possibly making it glossier |